How To Watch Security Camera On Computer

How to view your IP photographic camera remotely via a web browser

User Awarding Requirement

Updated 07-20-2021 08:23:48 AM 1843008

This Article Applies to:

Note: The steps below presume you already have your IP camera installed and continued to a router with Internet admission. HTTP://192.168.1.101 represents the IP address of the photographic camera existence accessed.

Footstep 1

Find your camera's IP address. If you don't know its IP address, click hither.

Step ii

Open a web browser and type the IP accost. Enter your login data.

Footstep iii

Go to SETTING > Basic > Network > Data to find the HTTP port number used by the photographic camera. The default is eighty.

Usually there is no need to change the port number. However some ISPs block port 80, then you may demand to change the port number accordingly. In the image below, we changed it to 3333.

Pace 4

After you change the port, you volition need to reboot the camera in order to relieve the changes. You can do that by going to SETTING > BASIC > System > Initialize and clicking Reboot.

Pace five

Afterwards you reboot, log back into the camera on your web browser, using
http://(IP address):(Camera port number).

For this case, the accost would be http://192.168.ane.101:3333.

Subsequently this, yous'll need to adapt the port forwarding settings on your router. The configuration depends on the router model. Consult your router'due south technical support accordingly. For this example, we are using a TP-Link TL-WR941ND.

Step 1

Log into your router's management folio (http://www.tp-link.u.s.a./faq-87.html).
Go to Forwarding > Virtual Servers and click Add New.

Step ii

Blazon the IP address and the port used past the camera in the corresponding field. For the Protocol, we recommend y'all select ALL. Click Save to add together this new entry.

Stride 3

Port 3333 tin now be used by the camera.

Step iv

Go to Status page to bank check the WAN IP address of the router.

Step 5

On a different PC (1 that's not connected to the aforementioned network as your camera), you can view your photographic camera by opening the web browser, typing http://(IP address):(Camera port number) and pressing Enter.

For this instance, the address would be http://183.38.7.205:3333.